EY Series Automatio Self-Cleaning Strainer
|Payment Type:||L/C,T/T,D/P,Paypal,Money Gram,Western Union|
|Terms of Trade:||FOB,CFR,CIF,EXW,FCA,CPT,CIP|
|Min. Order:||10 Piece/Pieces|
|Delivery Time:||15 Days|
|Packaging:||Plywood box or standard export packing|
|Place of Origin:||XINXIANG, CHINA|
Model No.: FST-EYAS-01
EY Series Automatio Self-Cleaning Strainer (FST-EY-01)
This type of the self-cleaning filter is a kind of structural form which is designed and developed according to the different installation requirements of pipeline.
The automatic cleaning filter is usually installed at the inlet of pressure reducing valve, pressure relief valve, fixed water level valve or other equipment to remove impurities in the medium.
In order to protect the valve and equipment from normal use, its function is to filter impurities in the water to protect the valve and equipment from normal operation.
Principle of Operation:
The water to be treated enters the body from the inlet, and the impurities in the water deposit on the stainless steel filter, resulting in pressure difference. The pressure difference between the inlet and outlet is monitored by the differential pressure switch. When the pressure difference reaches the set value, the plc electronic control device gives the hydraulic control valve and drives the motor signal, which causes the following actions: the motor drives the brush to rotate, the filter core is cleaned, At the same time, the control valve is opened for discharge, and the whole cleaning process lasts only for tens of seconds. When the cleaning is over, the control valve is closed, the motor stops rotating, the system returns to its initial state, and the system begins to enter the next filtration process.
After installation, the equipment is debugged by technicians, the filtration time and cleaning conversion time are set, the water to be treated enters the body from the inlet, and the filter starts to work normally.
Strainer Body: Carbon Steel (Bituminous Epoxy Paint, Epoxy Coating ),Stainless Steel.
Screen: Stainless Steel, Other special material.
Shaft Components: Stainless Steel, Nylon. PVC Drain Valve: Cast lron, Brass, Stainless Steel.
①Short self-cleaning time and small pressure loss.
②Through the finite element analysis, the brush shaft, which is the critical component, obtains the better structure, and strength.
③Inteligent control(PLC), high degree of automation.
④ Suit for various of raw water qualities and requirements.
⑤ Less vulnerable parts, no consumables, less running costs.
⑥Self-cleaning with continuous flow.
Performance of EL series strainer:
1. Flow rate of one piece:25-1200m2/h, more discharge can be achieved by more pieces in parallel connection.
2. Maximum operating temperature:70 C, products can be customized for higher temperature.
3. Filtration fineness:100-4500 micron.
5. Minimum operating pressure:0.1MPa.
6. Cleaning time:15-60s, cleaning time is set according to actual conditions.
7. Loss of pressure in cleaning:0.01MPa.
8. Control mode: manual, pressure difference or time control.
9.Operating voltage: Three-phase AC 220/380/440V 50/60Hz.
EYstrainer installation schematic:
Henan Sinofiltec Technology Co.,Ltd
Sinofiltec technology Co. Ltd, which is a professional manufacture & exporter of filter medium, filter cartridges and filtration equipments we have developed series of filters for the industrial fluids polluted, which are based on the requirements for the filtration on the aerospace and military equipments.
From the filter medium, filter cartridges and strainers to the filtration systems, we have the technical and production departments for the process, there will be a dynamic tracking management for the whole process.
We will strictly implement the international standards of the filter medium, filters and equipments We will design, develop and produce according to the fluids, working conditions and the special requirements of the customers.
There are three series of products such as water filters, air filters and hydraulic filters With nearly 30 years development, our products have been sold widely at home and abroad, which are deeply trusted by our customers.
We offer the high quality filters and filtration projects for global customers. To save the expensive operating cost for our customers.
Sinofiltec technology Co.. Ltd would like to comunicate and cooperate with customers widely at home and abroad, and truly to create more value for our customers, truly to achieve the best use of things & the value for money.
- Company Name: Henan Sinofiltec Technology Co.,Ltd
- Representative: Jia rui qing
- Product/Service: Filter Medium , Wedge Wire Filter Elements , Filter Assemblies , Hydraulic Filters , Sintered Wire Mesh , Water Filters
- Capital (Million US $): 5800000RMB
- Year Established: 1993
- Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
- Export Percentage: 91% - 100%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 5
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 30,000-50,000 square meters
- Factory Location: Xiyi street, No.2 indutrial park of the high & new industrial development zone
- Contact Person: Mr. Keven Jia
- Tel: 86-373-7039618
Premium Related Products